BW Solo Australian Dynamic Technologies 1:01 pm

BW Solo

Honeywell BW™ Solo is workers’ comfortable, reliable companion in hazardous environments.

No need to take apart the Honeywell BW™ Solo to replace components. To change out the sensor filters, just pop off a door on the front of the detector — no screwdriver required. Sensor and battery replacement are also easy.

The first single-gas detector to feature the 1-Series sensor — for high accuracy, lower costs and safer workers. The 1-Series sensor delivers fast response, reliable performance and long life, even in extreme environments. It’s the next-generation sensor for the gases you monitor most.

Fast response for CO, H2S and O2 — and more gas types coming soon. The 1-Series sensor has a compact square design, with one-third the height of the industry standard. That means a lighter, slimmer detector — plus faster sensor response time, because gas diffuses into it more quickly.

5-year sensor life and 3-year warranty. No need to worry about sensors wearing out quickly, adding cost and downtime. Instead, the 1-Series sensor lasts up to five years, depending on gas exposure, along with a three-year warranty. Reduce your cost of ownership; increase your peace of mind.

Honeywell BW Solo Features

One-button operation

Honeywell BW™ Solo is easy to operate — even if you’re wearing gloves. Using this button or the Honeywell SafetySuite Device Configurator software, you can easily configure set points, latching alarms and other parameters. Also access measurements for short-term exposure limit (STEL), time-weighted average (TWA) and the highest concentration of gas detected in the past 24 hours.

Safety at a glance
Want to quickly determine whether a detector is in compliance? Just activate Honeywell’s patented IntelliFlash™. This flashing green light — visible from a distance — means the detector has been bump tested and is monitoring correctly. Want to see when the detector is not in compliance? Activate the noncompliance flash, which blinks red when the detector needs a bump test, has detected a gas event, is due for calibration or needs a battery replaced. With Honeywell BW™ Solo, you can choose the indicator that works for your operating procedures.

Alarms that are easy to see and hear
When the Honeywell BW™ Solo alarms, the LEDs around the detector illuminate red for high visibility. Additional vibrating and audible alarm ensure you’re aware of danger — even in noisy environments.

Quick Specs

  • High standards of sensor quality and reliability
  • The easiest single-gas detector to service
  • The first single-gas detector with the 1 Series sensor for CO, H2S and O2
  • Complete with an extensive selection of sensor options
  • Compatible with IntelliDoX

Technical Specifications

BW Solo Technical Specifications
SpecificationsDescription
Size2.74″ H x 2.63″ W x 1.42″ D (69.7 x 66.7 x 36.1 mm)
Weight3.56 oz. (101g) without Sensor/3.63~4.09 oz.(103~116g) with different sensors
Alarms• Multi-tone audible (95 dB @ 30 cm/12”), vibration, visible (flashing bright red
LEDs), and on-screen indication of alarm conditions
• Real-time remote alarm notification (Wireless Model Only).
Sensor17 field-replaceable electrochemical sensors for toxics and oxygen
BatteryER14335 2/3AA lithium thionyl chloride battery (Over 1 year runtime)
DisplayFSTN dot matrix LCD display (128 x 64) with backlighting (activated
automatically with button press)
Control1 button (single press, double press, short hold, long hold)
SamplingAutomatic with IntelliDoX, or manual
Warranty3 years for instruments equipped with 1-Series sensor
2 years for instruments equipped with 4 Series sensor
• 3 years for CO, H2S, O2 1-Series sensors
• 2 years on 4 Series sensors, except for 1 year for Cl2, ClO2, NH3, O3, ETO
We are here to help

Please don’t hesitate to contact our highly trained and knowledgeable ADT staff to determine what type of system would best fit your needs.

Phone:
(02) 4577 9347

Email:
[email protected]

Address:
5 Aspinall Place,
Mulgrave 2756
NSW